About This

• 【Dimensions】Fire Burn Pot: 5" x 3 1/2" x 3 3/4", 7 Large air holes, 14 gauge steel wall. Total length of Hot Rod: 30". Hot stick: 3.7". High density cartridge heating element, 200W/120V wire lead, identical match to the OEM hot stick. The pellets are moved from the hopper to the fire burn pot by auger motor, where ignited by igniter hot rod, keep your smoker going and add delicious wood-fired flavor to your food.
• 【Compatibility】- The Grill Replacement Parts for Traeger and most Pit-Boss pellet grills (NOT ALL Pit-Poss, EXCEPT PTG). 【Not Fit】- Don't fit Traeger Tailgater 20, Pit Boss 1150 grills; not compatible with Traeger Pro 575 and 780, Ironwood 650 and 885, Timberline 850 and 1300 (Gen 2 only), Silverton 620 and 810, Century 885 wood pellet grills with D2 Direct Drive and WiFIRE Technology.
• 【Material & Package Includes】The grill burner made of heavy duty stainless steel to ensure long-lasting use, more substantial and durable. Grill replacement parts included 1 fire burn pot, 1 hot rod ignitor, 1 ash remover, 1 fuse, 1 set of screws.
• 【Easy to Install】Plug and play wiring, this burn pot can be assembled in a short time with basic tooling. Set the new Hot Rod to protrude 1/8 to 1/4 inch into the fire pot, took only about 10 minutes to replace.
• 【Installation Instructions】1.Remove and save the screws from the old fire pot. 2.Rotate the fire pot 45 degrees so the corners point outward and are not parallel to the auger anymore. 3.Lift the outward flang (away from the auger) of the fire pot to pull the part up and out from the auger tube. 4.Replace in reverse order either using the new screws if they fit, tap threads into your existing grill to accept the new screws. If new screws can't work on your grill, use your old screws.